Pronto! 482/486/682/863 15-5
Memory media functions in the offline menu
Accessing the Memory card menu is only possible if a memory medium is
installed in the default card slot.
Only the medium in the default slot can be operated via the operating panel
(see Interfaces on page 5-8). When operating via an interface, each card slot
can be addressed via a path.
Label from card
You can print labels whose descriptions are saved on the memory medium
using the Label from card function.
1 Select the Label from card function in the Memory card menu.
2 Press the ↵ button.
The name of the label found at the top of the index of the memory
medium is displayed.
3 Select the desired label in the index of the medium with the up and down
arrow buttons.
4 Press the ↵ button.
If you have selected a label which was saved with a fixed label quantity,
the print job is started immediately.
For label descriptions with a variable label quantity, you are requested by
the display to enter the label quantity.
If additional input on the label description is required, the display
requests you to enter the variable data.
5 Enter the label quantity/variable data with the following buttons:
• Left Arrow - cursor left
• Right Arrow - cursor right
• Up Arrow - increase value at cursor position by 1 or select next letter
in alphabet
• Down Arrow - decrease value at cursor position by 1 or select
previous letter in alphabet
6 Press the ↵ button briefly to confirm the input and start the print job.
To Next Page
Loading...
Need help?
General
