QuickLabel Systems pronto! 486 User Manual

8-8 Accessories
Mounting the External Rewinder
The printer is normally shipped with the front cover (6) mounted. In order to
install the rewinder the front cover has to be removed.
1 Loosen the screw (7).
2 Remove the front cover (6).
The External Rewinder is mounted on the printer so it is not necessary to
adjust the device.
Caution: The printer must be switched off when mounting the rewinder.
Otherwise it can cause damage on printer and rewinder.

QuickLabel Systems pronto! 486 Specifications

General

Brand	QuickLabel Systems
Model	pronto! 486
Category	Label Maker
Language	English