Ricoh G133 User Manual

Printer Installation
SM 1-17 G133
Installation
 The counter menu does
not show.
Meter Click
Charge:
PCU
SP5-930-010
Enables or disables the PM alert for
the PCUs.
If this SP is enabled, an alert
message is displayed when the
PCUs need to be replaced.
"1": No alert
Meter Click
Charge:
Image
Transfer Belt
Unit
SP5-930-014
Enables or disables the PM alert for
the image transfer belt unit.
If this SP is enabled, an alert
message is displayed when the
image transfer belt unit needs to be
replaced.
"1": No alert
Meter Click
Charge:
Fusing Unit
SP5-930-016
Enables or disables the PM alert for
the fusing unit.
If this SP is enabled, an alert
message is displayed when the
fusing unit needs to be replaced.
"1": No alert
Counter
method
SP5-045-001
Specifies if the counting method
used in meter charge mode is
based on developments or prints.
NOTE: You can set this one time
only. You cannot change the setting
after you have set it for the first
time.
“1”: Prints
A3/DLT
double count
SP5-104-001
Specifies whether the counter is
doubled for A3/DLT paper.
“0”: Single
counting
Service Tel:
Telephone
/Facsimili
SP5-812-001
and -002
-001: shows or sets the telephone
number of the service
representative.
-002: shows or sets the fax number
of the service station. The number
-

Ricoh G133 Specifications

General

Brand	Ricoh
Model	G133
Category	All in One Printer
Language	English