Fusing
SM 3-77 G133
Replacement
Adjustment
5. Tension roller [A]
When re-installing the tension roller
Follow points 3 and 4 explained in "When re-installing the pressure roller" ( "p.3-3
"Pressure Roller and Pressure Roller Bearing"")
3.10.7 FUSING BELT, HEATING ROLLER, HEATING ROLLER
BUSHING AND FUSING ROLLER
1. Fusing unit ( "p.3-3 "Fusing Unit"")
2. Fusing right cover, fusing upper cover ( "p.3-3 "Fusing Lamp"")
3. Pressure Roller ( "p.3-3 "Pressure Roller and Pressure Roller Bearing"")
4. Tension roller ( "p.3-3 "Fusing Roller Bushing and Tension Roller Bushing"")
5. Discharge brush bracket [A] ( x 1)
6. Fusing belt sensor actuator [B] ( x 1)
7. Slide the holder rollers [C] to the front and rear sides ( x 1 each).
To Next Page
Loading...
Need help?
General
