Installation Requirements
SM 1-1 G179
Installation
1. INSTALLATION
1.1 INSTALLATION REQUIREMENTS
Never turn off the main power switch when the power LED is lit or flashing. To
avoid damaging the hard disk or memory, press the operation power switch to
switch the power off, wait for the power LED to go off, and then switch the main
power switch off.
Install the machine in a safe place for keeping security.
Make sure that the operation instructions are kept at a customer's hand.
The main power LED lights or flashes while the main machine is communicating
with the network server, or while the machine is accessing the hard disk or
memory for reading or writing data.
1.1.1 ENVIRONMENT
Temperature Range: 10°C to 32°C (50°F to 90°F)
Humidity Range: 15% to 80% RH
Ambient Illumination: Less than 1,500 lux (do not expose to direct sunlight.)
To Next Page
Loading...
Need help?
General
