Main Machine Installation
G179 1-4 SM
1.2 MAIN MACHINE INSTALLATION
1.2.1 INSTALLATION OVERVIEW
The installation procedures of the following items are in the Operating Instructions:
Main Machine and Hardware Options
Printer G179 (main machine) Installation
Paper Feed Unit D351 (Option)
Controller Options
IEEE1284 Interface Board B679
IEEE802.11a/g Interface Unit D377
Gigabit Ethernet G874
VM Card M345
Data Storage Card G874
IPDS Unit M345
DataOverwriteSecurity Unit (Type J) M345
HDD Encryption Unit (Type B) M345
The bridge unit (D386) and either the 2,000-sheet LCT (D352) or the paper tray
(D351) must be installed before the finisher SR3030 (B805) or SR790 (B408) is
installed.
The installation procedures of the following options are in this service manual:
Hardware Options
LCIT PB3050: D352
LCIT RT3000: D353
Bridge Unit: D386 (for Finisher SR3030 and SR790)
Finisher SR3030 B805
Punch Unit B702 (for Finisher SR3030)
Jogger Unit B703 (for Finisher SR3030)
Finisher SR790 B408
To Next Page
Loading...
Need help?
General
