106
MFX/IFX Parameters
57 GtAmpSim
0
Chorus
L outL in
R in
R out
Balance W
Balance W
Balance D
Balance D
Parameter Value Explanation
Pre Amp Sw OFF, ON Turns the amp switch on/o.
Pre Amp Type
Type of guitar amp
JC-120 This models the sound of the Roland JC-120.
CLEAN TWIN This models a Fender Twin Reverb.
MATCH DRIVE
This models the sound input to left input on
a Matchless D/C-30.
A simulation of the latest tube amp widely
used in styles from blues and rock.
BG LEAD
This models the lead sound of the MESA/
Boogie combo amp.
The sound of a tube amp typical of the late
‘70s to ‘80s.
MS1959I
This models the sound input to Input I on a
Marshall 1959.
This is a trebly sound suited to hard rock.
MS1959II
This models the sound input to Input II on a
Marshall 1959.
MS1959I+II
This models the sound of connecting inputs I
and II on a Marshall 1959 in parallel. lt creates
a sound with a stronger low end than I.
SLDN LEAD
This models a Soldano SLO-100. This is the
typical sound of the eighties.
METAL 5150
This models the lead channel of a Peavey EVH
5150.
METAL LEAD
This is distortion sound that is ideal for
performances of heavy ris.
OD-1
This models the sound of the BOSS OD-1.
This produces sweet, mild distortion.
OD-2 TURBO
This is the high-gain overdrive sound of the
BOSS OD-2.
DISTORTION
This gives a basic, traditional distortion
sound.
FUZZ A fuzz sound with rich harmonic content.
Pre Amp Volume 0–127 Volume and amount of distortion of the amp
Pre Amp Master 0–127 Volume of the entire pre-amp
Pre Amp Gain LOW, MIDDLE, HIGH Amount of pre-amp distortion
Pre Amp Bass 0–127
Tone of the bass/mid/treble frequency rangePre Amp Middle 0–127
Pre Amp Treble 0–127
Parameter Value Explanation
Speaker Sw OFF, ON
Selects whether the sound will be sent
through the speaker (ON) or not (OFF)
Speaker Type
Cabinet
Diameter (in
inches) and
number of the
speaker
Microphone
SMALL 1
Small open-back
enclosure
10 Dynamic
SMALL 2
Small open-back
enclosure
10 Dynamic
MIDDLE
Open back
enclosure
12 x 1 Dynamic
JC-120
Open back
enclosure
12 x 2 Dynamic
BUILT-IN1
Open back
enclosure
12 x 2 Dynamic
BUILT-IN2
Open back
enclosure
12 x 2 Condenser
BUILT-IN3
Open back
enclosure
12 x 2 Condenser
BUILT-IN4
Open back
enclosure
12 x 2 Condenser
BUILT-IN5
Open back
enclosure
12 x 2 Condenser
BG STACK1
Sealed enclosure 12 x 2 Condenser
BG STACK2
Large sealed
enclosure
12 x 2 Condenser
MS STACK1
Large sealed
enclosure
12 x 4 Condenser
MS STACK2
Large sealed
enclosure
12 x 4 Condenser
MTL STACK
Large double
stack
12 x 4 Condenser
2-STACK
Large double
stack
12 x 4 Condenser
3-STACK
Large triple stack 12 x 4 Condenser
Chorus Switch OFF, ON Chorus on/o
Chorus Pre Delay 0.0–100 [msec]
Adjusts the delay time from the direct sound
until the chorus sound is heard.
Chorus Rate
(Hz) 0.05–10.00 [Hz] Frequency of modulation
Chorus Depth 0–127 Depth of modulation
Chorus Balance D100:0W–D0:100W
Adjusts the volume balance between the
sound that is sent through the chorus (W)
and the sound that is not sent through the
chorus (D).
Level 0–127 Output Level