112
MFX/IFX Parameters
67 Enhancer
0
Flanger
Balance D
Balance D
Mix
Mix
L out
R out
Balance W
Balance W
L in
R in
Feedback
Parameter Value Explanation
Enhancer Sens 0–127 Sensitivity of the enhancer
Enhancer Mix 0–127
Level of the overtones generated by the
enhancer
Flanger Pre Delay 0.0–100 [msec]
Adjusts the delay time from the direct sound
until the anger sound is heard.
Flanger Rate
(sync sw) OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
&
“TEMPO” (p. 52)
Flanger Rate (Hz) 0.05–10.00 [Hz]
Frequency of modulation
Flanger Rate
(note)
Note
&
“Note” (p. 120)
Flanger Depth 0–127 Depth of modulation
Flanger Feedback -98–+98 [%]
Adjusts the proportion of the anger sound
that is fed back into the eect. Negative (-)
settings will invert the phase.
Flanger Balance D100:0W–D0:100W
Adjusts the volume balance between the
sound that is sent through the anger (W)
and the sound that is not sent through the
anger (D).
Level 0–127 Output Level
68 Enhancer
0
Delay
Balance D
Balance D
Mix
Mix
L out
R out
Balance W
Balance W
L in
R in
Feedback
Parameter Value Explanation
Enhancer Sens 0–127 Sensitivity of the enhancer
Enhancer Mix 0–127
Level of the overtones generated by the
enhancer
Delay Time
(sync sw) OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
&
“TEMPO” (p. 52)
Delay Time (msec) 1–2600 [msec]
Delay time from when the original sound is
heard to when the delay sound is heard
Delay Time
(note)
Note
&
“Note” (p. 120)
Delay Feedback -98–+98 [%]
Adjusts the proportion of the delay sound
that is fed back into the eect. Negative (-)
settings will invert the phase.
Delay HF Damp
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which the delay
sound fed back to the eect is ltered out
(BYPASS: no cut).
Delay Balance D100:0W–D0:100W
Adjusts the volume balance between the
sound that is sent through the delay (W) and
the sound that is not sent through the delay
(D).
Level 0–127 Output Level
69 Chorus
0
Delay
Balance D
Balance D
L out
R out
Balance W
Balance W
Feedback
Balance D
Balance W
Balance W
Balance D
L in
R in
Parameter Value Explanation
Chorus Pre Delay 0.0–100 [msec]
Adjusts the delay time from the direct sound
until the chorus sound is heard.
Chorus Rate
(sync sw) OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
&
“TEMPO” (p. 52)
Chorus Rate (Hz) 0.05–10.00 [Hz]
Frequency of modulation
Chorus Rate
(note)
Note
&
“Note” (p. 120)
Chorus Depth 0–127 Depth of modulation
Chorus Balance D100:0W–D0:100W
Volume balance between the direct sound (D)
and the chorus sound (W)
Delay Time
(sync sw)
OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
&
“TEMPO” (p. 52)“TEMPO” (p. 52)
Delay Time (msec) 1–2600 [msec]
Delay time from when the original sound is
heard to when the delay sound is heard
Delay Time
(note)
Note
&
“Note” (p. 120)
Delay Feedback -98–+98 [%]
Adjusts the proportion of the delay sound
that is fed back into the eect. Negative (-)
settings will invert the phase.
Delay HF Damp
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which the delay
sound fed back to the eect is ltered out
(BYPASS: no cut).
Delay Balance D100:0W–D0:100W
Adjusts the volume balance between the
sound that is sent through the delay (W) and
the sound that is not sent through the delay
(D).
Level 0–127 Output Level
To Next Page
Loading...
Need help?
General
Weight and Dimensions
