Roland Groovebox MC-707 User Manual

46
Editing the DRUM Track
Pad Settings
(PAD MENU)
Here you can assign an instrument to each pad.
In PAD MENU you can change the instrument, and load or edit samples.
1.
Hold down the [SHIFT] button and press the [SOUND]
button.
The KIT EDIT screen appears.
2.
Use the cursor buttons to select the pad that you want to
edit, and then press the [ENTER] button.
The DRUM INST MENU screen appears.
Changing the Pad’s Sound (Instrument)
(INST SELECT)
1.
Use the cursor buttons to select "INST SELECT," and then
press the [ENTER] button.
The DRUM INSTRUMENT browser appears.
In the DRUM INSTRUMENT browser, instruments or sample les can
be loaded into a kit.
5
PRESET: Load an instrument or kit from the MC-707’s presets
5
PROJECT: Load an instrument from a project saved on the SD card
5
WAVE FILE: Load a sample le from the SD card
Editing an Instrument
(INST EDIT)
Here’s how to edit the instrument that’s loaded into the pad.
1.
Use the cursor buttons to select “INST EDIT,” and then press
the [ENTER] button.
The DRUM INST SETTING screen appears.
Select the category of parameter that you want to edit.
Use the cursor buttons or the [C1] [C2] knobs to switch categories.
Use the cursor buttons or the [C3] knob to select the parameter that
you want to edit, and use the [C4] knob to edit the value.
&
“Parameter List” (p. 61)
* If sample is selected as the WAVE GROUP TYPE, you can move the cursor to
Wave Number and press the [ENTER] button to edit the waveform.
Editing a Sample
(SAMPLE EDIT)
Here’s how to edit the user sample that’s loaded.
1.
Use the cursor buttons to select “SAMPLE EDIT,” and then
press the [ENTER] button.
The SAMPLE EDIT screen appears.
Parameter Value Explanation
START 0–8388607
Species the position at which playback
starts.
LOOP 0–8388607 Species the loop position.
END 0–8388607
Species the position at which playback
ends.
ZOOM x65536–x1 Zooms the waveform display in or out.
MODE
FWD, ONE-SHOT,
REV, REV-ONE
Species the playback method.
LEVEL 0–127 Adjusts the volume.
TUNE
-50.0 cent–50.0
cent
Finely adjusts the pitch.
gain 0db, +6db, +12db Species the sample’s approximate volume.
Original Key C-1–G9 Registers the sample’s pitch.
* The waveform specied as the instrument’s WMT1 is edited.
* If you want to edit the WMT2–3 waveform, move the cursor to WAVE NUMBER
in the INST EDIT screen, and press the [ENTER] button.

Roland Groovebox MC-707 Specifications

General

Product color	Black
USB direct playback	-
Built-in optical drive	No
USB port	Yes
USB connector type	USB Type-B
USB ports quantity	1
Compatible memory cards	SD, SDHC
Display type	LCD
Display resolution	256 x 80 pixels
Current	2 A
Power supply type	AC

Weight and Dimensions

Depth	263 mm
Width	426 mm
Height	60 mm
Weight	2100 g