Sam4POS Operators Manual v2.33 Basic Operations • 61
Print Label
Note: you must have a label printer setup and mapped to the terminal before you can print labels.
8. To print a barcode from the Price Check function – after selecting a PLU, press the print icon ; the
PRINT LABEL dialog displays:
9. Enter the number of labels desired in the QTY field, Choose the LABEL FORMAT, and select the
appropriate PRICE LEVEL to print on the label.
10. Press OK to print the label to the attached label printer.
Scale Operations
The Sam4POS can be interfaced to an electronic scale, allowing direct entry of the item's weight by using the
SCALE key. Scale items could also be set to automatically get the scale weight and register the item.
Scale PLU Program Notes
See Program Mode Programming, PLU, PLU Status Group. The following options affect each PLU linked to
a PLU status group.
SCALE: Select Auto Scale (weight on the scale is automatically entered when the PLU is registered) or
Manual Scale (the weight must be entered before registering the PLU).
AUTO TARE# (0-20): If a tare is selected here, the preprogrammed tare weight will be subtracted from
the scale weight when the PLU is registered.
Scale Function Key Notes
See Program Mode Programming, Function Key Function Key to set the SCALE Key attributes:
MANAGER REQUIRED?
ALLOW MANUAL ENTRY OF WEIGHT
WEIGHT SYMBOL FOR MANUAL ENTRY
ALLOW TARE WEIGHT ENTRY
TARE ENTRY IS COMPULSORY
ALLOW MANUAL ENTRY OF TARE
To Next Page
Loading...
Need help?
General
