62 • Basic Operations Sam4POS Operators Manual v2.33
Registering Scale Items
Direct Scale Entry
1. Place the item on the scale.
2. Touch the SCALE key to display the weight.
3. Register the open or preset Scalable PLU.
Manual Weight Entry
1. Enter the weight using the decimal key.
2. Touch the SCALE key to display the weight.
3. Register the open or preset Scalable PLU.
Auto Scale Entry
1. Place the item on the scale.
2. Touch the Auto-Scale PLU item on the touch screen or real-keyboard.
Tare Weight
A tare is the amount of weight accounted for by the container or packaging. By entering a tare weight (as required
by law in some areas) the weight of the container is subtracted and only the true weight of the product is measured
on the scale. A Tare Weight can be selected and applied to a scalable PLU (not Auto-scale) or a specific Tare can
be applied automatically by setting the Auto-Tare in the PLU Status Group for scale items.
Tare weights are programmed in:
Program Mode → Options → Tare Weight
Auto Tare Weight
1. Place the item in the container on the scale.
2. Register the open or preset Scalable (Auto-Scale\Auto-Tare) PLU.
3. The PLU is registered (minus the weight of the Tare).
To Next Page
Loading...
Need help?
General
