Unify OpenScape 4000 User Manual

Using Bluetooth 133
Beacon
The phone can make contact via Bluetooth with smartphones or tablets in the
vicinity using beacons. Information can then be exchanged between the phone
and, for example, the smartphone.There are two option available; Eddystone is
an Open Source project from Google for beacon applications and iBeacon is Ap-
ple’s project for beacon applications.
Activating/deactivating Eddystone beacons
z You can also configure this setting via the Web interface  page 238.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Activate with the Softkey. The Bluetooth function is activated and is now avail-
able.
Open using the Softkey.
Open using the Softkey.
Select using the Softkey.
Setting up a connection to a server for telephone beacons
€ Select input for URI.
The current address is displayed. Open the URI field with the Softkey.
An address may already be entered. This should be an optimally short HTTPS
address. An URL shortener can be used to limit long addresses.
j Change to the desired address and conclude your input with the Softkey.
Setting the interval
€ Select input for Interval (ms).
The current interval is displayed. Open the Interval (ms) field with the Softkey.
Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Enabled
¦_
Beacon
-
_
Mode
K
_
Eddystone beacon
¥
_
The configuration menu will disable/gray out the options that are not appli-
cable with the selected Mode.
URI
https://www.unify.com
K
_
¾
https://www.unify.com
Q
_
Interval (ms)
1000
K
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English