Unify OpenScape 4000 User Manual

Making calls in the team 157
€ Select the required line.
Confirm line 2 for example.
Press the Function key
1
. The connection is set up.
Forwarding calls for the primary line
Call forwarding can only be activated for the primary line. Which call forwards
are possible, how they are configured and activated can be found from
 page 199.
Call forwarding information
If you have activated one of the forwarding types on your phone for the primary
line and a subscriber calls, an information window with the following information
opens:
Call from x forwarded to x
Dialing using the hot or warm line function
If you lift the phone's handset or press the loudspeaker key, a number is dialed
• immediately in the case of a hot line or
• after a defined period of time in the case of a warm line,
for the line specified by the administrator.
Examples:
• The phone in the elevator immediately dials the reception number.
• The phone at a patient's bed dials the ward number after one minute, for ex-
ample, if no other number is dialed.
During calls
Making and receiving calls on a single line
If you only use one line on your multi-line telephone to make calls, and you re-
ceive calls on the same line, the phone operates in the same way as a single-
line telephone:
• Number Redial  page 210
• Consultation  page 91
• Toggle/Connect  page 94
• Callback  page 88
• Hold  page 96
• Call waiting (second call)  page 97
• Transfer call  page 99
• Conference  page 94
Functions available exclusively for the primary line:
ù
Line 2
Available
ü
_
â Redial ã
_
1. Please note the information in relation to the call log  page 210.
ñ
Your administrator has activated "Forwarding shown".
ñ
Your administrator can configure a hot line or warm line for your phone.

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English