Unify OpenScape 4000 User Manual

Privacy/security 167
Privacy/security
Do not disturb
If "Do not disturb" is activated, your telephone will not ring. The caller hears the
busy tone or an announcement that the called party cannot accept any calls at
present.
Do not disturb can be activated/deactivated using a specially programmed
Function key on the OpenScape Key Module 600 or also from the Presence
menu  page 28.
Enabling do not disturb via the Presence menu
\ Press the key shown.
Enable or disable using the Softkey.
Enabling do not disturb via a key
Prerequisite: To activate "Do not disturb", a key has to be assigned the "Do not
disturb" function  page 136 and the "Do not disturb" function has to be allowed
 page 167.
Press the Function key.
Press the Function key with illuminated LED once more to deactivate the func-
tion.
Allowing "Do not disturb"
z You can also configure this setting via the Web interface  page 238.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Open using the Softkey.
On multi-line telephones  page 64, you can only activate the "Do not dis-
turb" function for your primary line.
Do not disturb
¢_
¥ Do not disturb R
_
¥ Do not disturb R
¤
Settings
_
$
User settings
-
_
$
Configuration
-
_
Incoming calls
-
_
Handling
-
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English