Unify OpenScape 4000 User Manual

208 Other settings and functions
Activating/deactivating the hold reminder
tone
z You can also configure this setting via the Web interface  page 238.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Enable or disable using the Softkey.
Save the setting with the Softkey.
Setting the hold reminder time
Use "Hold reminder" to specify when you want to receive an automatic reminder
about a held call. The minimum time value is 1, in other words the reminder is
output after one minute. The maximum value is 15 minutes.
z You can also configure this setting via the Web interface  page 238.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
€ Switch to Hold reminder delay. The current setting is displayed.
Open using the Softkey.
Confirm with the Softkey to set the new time.
Save the setting with the Softkey.
Settings
_
$
User settings
-
_
$
Configuration
-
_
Connected calls
-
_
Allow hold reminder
¢_
Q
_
Settings
_
$
User settings
-
_
$
Configuration
-
_
Connected calls
-
_
Hold reminder delay
3
K
_
5
¥
_
Q
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English