Unify OpenScape 4000 User Manual

84 Making calls
Making calls
You make a call by entering the phone number of the relevant party using the
dialpad or by searching for this party in the permanent Conversations list. Con-
versations include:
• Dialed and received calls
• Subscribers from Exchange
• Subscribers from a Corporate directory
If you cannot find received or dialed calls in the list, check if the call log is acti-
vated.
Off-hook dialing
^ Lift the handset.
The input field in Conversations is opened in numeric mode.
j Enter the phone number.
Z Confirm that the phone number is complete or wait until the autodial delay ex-
pires (see  page 88).
or
The required contact is shown in the list. Confirm with the Softkey. The connec-
tion is set up.
If you allowed the option "Busy When Dialing"  page 217, you will not be
interrupted by an incoming call. In this case, the caller hears the busy sig-
nal.
©
Dial a number...
A
©
082631565
O
Peter Maier O
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English