Unify OpenScape 4000 User Manual

Other settings and functions 211
Permitting call deflection
z You can also configure this setting via the Web interface  page 238.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Open using the Softkey.
Activate with the Softkey.
Open the setting by selecting the Softkey.
j Enter the phone number to which the subscriber is to be deflected and confirm
(see  page 24).
or Deflecting to a phone number from an existing local conversation
Open using the Softkey.
The input box of the Conversation Selector screen opens. Start typing the
μ contact’s name there to find the desired conversation or locate it using the arrow
€ keys.
Select the default phone number of a conversation using the Softkey.
Conversations with- icon indicate more than one available phone numbers.
- To select a phone number other than the default use the arrow key.
Select the desired phone number using the Softkey.
Q Confirm using the Softkey.
Settings
_
$
User settings
-
_
$
Configuration
-
_
$
Incoming calls
-
_
Deflect
-
_
Allow deflection
¢_
Default destination
K
_
Entering a destination phone number is not mandatory when call deflec-
tion is active. To forward a call, you will be prompted in the case of the un-
saved destination phone number to enter a destination number or select a
corresponding subscriber from the conversations list.
Select conversation
s
_
¾
Search for...
A
_
Barney
+445137245764
Q
_
Wilma -
+44513
Q
_
†
Mobile:+93122925112
Q
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English