Unify OpenScape 4000 User Manual

238 Web interface (WBM)
Web interface (WBM)
You can configure a number of settings for your phone via the Web interface. Communication is
via a secure HTTPS connection. Access to the Web interface must be activated by your adminis-
trator.
Launching the Web interface
To launch the interface, open a web browser and enter the following:
https://[IP address of the phone]
[IP address of the phone] is the IP address of your phone.
or
https://[Name of the phone]
ñ [Name of the phone] that was assigned by the administrator.
For more information on the IP address, the web interface address, and how to connect the
telephone to the network, refer to the section entitled "Displaying network information"
 page 195.
You might receive a certificate notification from the browser. Follow the instructions to down-
load the certificate.
You will be prompted to configure a user password the first time you call up the web interface
 page 168. You must log in with this password in future every time you want to open the
User Settings.

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English