150 Making calls in the team
Deflecting a call to a DSS subscriber
Prerequisite: The deflect function is enabled for DSS keys. For information on
the current setting, see ïƒ page 212.
If you receive a call on one of your lines, you can immediately deflect it to the
DSS subscriber.
Your phone rings and a line key flashes.
Press the relevant DSS key. The call is deflected to the DSS subscriber. If the
DSS subscriber does not answer, you can pick up the call by pressing the line
key.
LED display on DSS keys
ý
3333 O
£
Q Office O
_
DSS key Meaning
_
Off: The phone is in idle mode.
£
Flashes: You can accept a call for the DSS subscriber via the
key. The call is routed to your primary line when the call is ac-
cepted.
¤
Illuminates: The line is busy. Provided that second call is ac-
tivated you can still reach the DSS subscriber via the key. It
can accept your call as a second call.
To Next Page
Loading...
Need help?
General