Unify OpenScape 4000 User Manual

Other settings and functions 235
Diagnostic data
This information overview in the user area of the service menu provides you with
information on the current configuration of the telephone:
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
You see a numbered list of telephone parameters with the current settings.
You can see a more structured view of the list via the Web interface  page 238:
Example:
Settings
_
$
User settings
-
_
Diagnostic information
-
_
Diagnostic data
3/11/2016 9:53:42 AM
00 Terminal number 3336
01 SIP server 192.168.1,230
02 SIP port 5060
03 SIP registrar 192.168.1,230
04 SIP registrar port 5060
05 SIP gateway 192.168.1,230
06 SIP gateway port 5060
07 SIP transport UDP
08 TLS renegotiation Insecure allowed
09 SIP local port 5060
10 Server features No
11 DNS results None
12 Multiline Yes
13.1 Keyset Lines Primary: 3336 (registered)
13.2 Keyset Lines Line: 3334 (registered)
13.3 Keyset Lines DSS: 3338 (registered)
14 Backup active Yes
15 Backup proxy None
16 Use secure calls No
17 SRTP.Status Disabled
18 SIP server cert. check No certificate check
19 Software version V0R1.0.0 SIP DEV
20 Display message None
21 Last restart 2016-03-10T11:37:27
22 Memory free 159729K free
23 IP protocol mode IPv4_IPv6

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English