Xerox 2510 User Manual

CQ 14 Registration Probable Cause Corrective Action
Registration is not adjusted correctly.
1.
Operator pushed document too far into
6.
the document handler.
Defective motion sensor (registration will
vary copy to copy).
Defective media feed clutch.
Defective or loose upper media feed roll.
Perform the Registration adjustment (ADJ
8.1).
2.
3.
4.
Replace the motion se~lsor (PL 8.5).
Incorrect or defective document sensor. 5.
Replace the media feed clutch (PL 8.3).
Replace the upper feed roll (REP
8.3).
Ensure that the front document sensor is
installed correctly so that, the actuator
actuates
0.040 inch (Imm) above the
maximum height of the document drive
rolls.
Instruct the operator on how to insert the
document into the document handler.
CQ 14 Registration

Xerox 2510 Specifications

General

Brand	Xerox
Model	2510
Category	Copier
Language	English