Xerox 2510 User Manual

'REP 10.8 Oil Pads
(2510 Wnag 252 and 251 5)
Parts List on PL 10.5
Removal
WARNING
Disconnect the power cord.
1. Remove the oil dispense assembly (REP
10.5).
2. (Figure 1): Remove the oil pads.
REMOVE THE
MOVE THE WlCK
A
MOVE THE PLASTIC
COVER
Figure 1. Remove the Oil Pads
Relacement
NOTE: Ensure that the wick is not wrinkled
and that the wick edge
is a minimum of
1. (Figure 2): Install the new oil pads.
518 inch (14mm).
NOTE: STEP A: Ensure that the edge of the
plastic cover
is under the edge of the
extrusion.
OIL I'AIjS (2) ANI)
EDGE
ON WlCK UNDER
E OF THE EXTRUSION
(14mm)
INSTALL THE EDGE OF THE OIL
\\ I,
UNDER TllE EDGE OF
RUSION (FULL LENGTH)
JR SMS M
EPEE3
Figure 2. Install the new Oil Pads
(Continued)
REP 10.8

Xerox 2510 Specifications

General

Brand	Xerox
Model	2510
Category	Copier
Language	English