Xerox 2510 User Manual

2. (Figure 3): lnsert the wick edge under the
3. (Figure 4): Install the plastic cover over the
plastic cover. oil pads.
NOTE: STEP 2 0: If the plastic cover is lifted
4. Install the oil dispense assembly.
too far, the narrow edge will come out
from under the extrusion edge.
/ LIFT THE PLASTIC
COVER SLIGHTLY
FOLD THE
WICK OVER THE OIL
PADS (FULL LENGTH) WHILE
DOING THE STEP
B
Figure 3.
Insert the wick Edge under the
Plastic Cover
OVE THE PLASTIC
PLASTIC COVER UNDER THE
EDGE OF THE EXTRUSION
(FULL LENGTH) WHILE DOING
L 'f/
THE STEP B v
Figure 4. Install the Plastic Cover over the Oil Pads
7192
25101251 5 4-47
REP 10.8

Xerox 2510 Specifications

General

Brand	Xerox
Model	2510
Category	Copier
Language	English