Xerox D136 System Administration Guide

Time Server Address
This is used to enter the IP address for the time server.
Note
Set the NTP Time Synchronization to on.
1. From the Machine Clock/Timers screen, select Time Server Address and press Change
Settings.
2. Enter the IP address:
• IP Address: Set the IP address of the time server from which the time is obtained,
using values 0 to 255.
• Addresses 244 to 255.XXX.XXX.XXX and 127.XXX.XXX.XXX cannot be set.
• Select Next to enter the next part of the IP address if the address between dots
is less than 3 digits.
3. Select Save to save the settings and return to the previous window.
Auto Clear
If a given time period elapses with no operation, the machine automatically returns to
the initial screen.
Set a period from 1 through 4 minutes, in intervals of 1 minute.
Note
Even if Off is selected, any currently scanned and pending jobs continue processing after
one minute of inactivity on the machine.
1. From the Machine Clock/Timers screen, select Auto Clear and select Change Settings.
2. Select Off or On.
3. If you selected On, select the time by using the arrows or the numeric keypad to enter
a numeric quantity.
4. Select Save to save the settings and return to the previous window.
Auto Job Release
If an error occurs during a copy or scan job, you can set the time that elapses until the
current job is automatically cleared, and thereby enabling the completion of the next
job. Errors that may occur include a paper feed, a jammed original, a copy jam, running
out of hard disk space, etc. Once the current job is cleared, jobs that can be continued
are limited to those that only use parts of the machine not affected by the error. Set
the value in the range 4 to 99 minutes, in 1 minute increments. Select Off if you do not
want to use this feature.
1. From the Machine Clock/Timers window, select Auto Job Release, and select Change
Settings.
2. Select Off or On.
3. If you selected On, set the time using the arrows or the numeric keypad to enter a
numeric quantity.
10-5Xerox
®
D95/D110/D125/D136 Copier/Printer
System Administration Guide
System Settings

Xerox D136 Specifications

General

Brand	Xerox
Model	D136
Category	Copier
Language	English