Xerox D136 System Administration Guide

9. Click Edit in the Layout Adjustment area. Select the Original Orientation, Original
Size, Reduce/Enlarge, Output Size, and Edge Erase parameters and click Apply.
10. Click Edit in the Filing Options area. Set the Document Name, and Document Format
parameters and click Apply.
11. Click Edit in the Report Options area. Click to enable the Confirmation Sheet and/or
Job Log and click Apply.
12. Click Edit in the Network Scanning Image Settings area. Set the Viewing and Search
option and click Apply.
13. Click Edit in the Compression Capability area. Click to enable the desired compressions
and click Apply.
Adding a job template file destination
This section describes the procedure to add a file destination to be used by the job
templates for storing scanned documents.
1. Connect to CentreWare Internet Services.
2. Click the Properties tab and ensure that Configuration Overview is selected. Click
the Network Scanning Settings button.
3. Click File Repository Setup Configure.
4. Click Default File Destination Edit.
5. The File Destination screen appears.
6. Set the File Destination parameters.
a) Set the Friendly Name for the file destination.
b) Set the Protocol (FTP or SMB).
c) Set the Host Name/IP Address & Port.
d) Set the Login Credentials to Access the Destination.
e) Set the File Path (if necessary).
f) Enter the Login Name and Password of the destination server.
g) Click Apply.
Xerox
®
D95/D110/D125/D136 Copier/Printer3-20
System Administration Guide
Using CentreWare Internet Services

Xerox D136 Specifications

General

Brand	Xerox
Model	D136
Category	Copier
Language	English