Xerox D136 System Administration Guide

4. Repeat steps for the remaining Other Settings items.
5. From the Other Settings screen, select Close to return to the Service Settings screen.
Memory Full Procedure
Select either Delete Job or Run Job as the default setting. This default setting appears
while scanning an original if there is insufficient hard disk space for the scanner. If an
insufficient amount of hard disk space is determined, a confirmation screen appears
asking how the partially stored data should be handled (cancel job or run job).
• Delete Job: The stored data is discarded.
• Run Job: The partially stored data is treated as valid and complete, the job is run.
If the user does not respond to the confirmation screen and a predetermined amount
of time elapses, the machine automatically processes the partially-stored data according
to the default setting selected here.
Maximum Stored Pages
Select the maximum number of stored pages of a scan original. Select a number from
1 through 999 pages.
Saturation
Select Pastel +2, Pastel +1, Normal, Vivid +1, or Vivid +2.
Background Suppression Level
Select the amount of background suppression for scanned data. Select from Higher +1,
Higher +2, Normal, Lower -1, or Lower -2.
Shadow Suppression Level
Select Higher +2, Higher +1, Normal, Vivid +1, or Vivid +2.
TIFF Format
Select the TIFF format for scanned data. Select either TIFF V6 or TTN2.
Image Transfer Screen
Select whether or not to display a message when the scan process completes.
• Disabled: Do not show message.
• Display Message at End of Scanning: Show scan completion message.
Xerox
®
D95/D110/D125/D136 Copier/Printer10-64
System Administration Guide
System Settings

Xerox D136 Specifications

General

Brand	Xerox
Model	D136
Category	Copier
Language	English