Xerox D136 System Administration Guide

Adjust Fold Position (Finisher Adjustment) - optional
This feature is available only if the optional Standard/Booklet Maker Finisher is
connected to the machine. Use this feature to adjust the fold position on the printed
output. If the optional C/Z Folder is also connected, more folding options are available.
Initialize Hard Disk Drive
This procedure initializes the hard disk. The data erased by formatting includes additional
fonts, ESC/P, HP-GL/2, and SMB folder.
Tip
The secure print document log is not erased.
1. From the Maintenance screen, select Initialize Hard Disk Drive.
2. Select the partition to be reformatted and select Start.
3. Select Yes.
4. When reformatting completes successfully, the message screen appears, select
Confirm.
5. Select Close to return to the Maintenance screen.
6. Select Close to return to the Common Settings screen.
Software Options
Use the Keyboard to type passcodes for the Software Options and select Reboot. Up to
five passcodes can be typed.
Delete Certificates/Initialize Settings
Tip
Do not use this function unless you are authorized and have checked with your Xerox
Service Representative.
This deletes all data recorded in the machine. This includes all user settings, and data
recorded automatically by the system.
Software Options
Use the Keyboard to type passcodes for the Software Options and select Reboot. Up to
five passcodes can be typed.
Alignment Adjustment Settings
Adjustments can be made to the image based on the alignment output of a document.
Various adjustments can be modified such as: image position, scale, and skew. This can
be achieved through the use of the twenty default adjustment types. In addition, a
specific paper tray can be assigned to a specific adjustment type.
10-21Xerox
®
D95/D110/D125/D136 Copier/Printer
System Administration Guide
System Settings

Xerox D136 Specifications

General

Brand	Xerox
Model	D136
Category	Copier
Language	English