Xerox D136 System Administration Guide

The FTP service of Microsoft Internet Information Server 3.0 or later.
• Novell NetWare
FTP service of NetWare 5.11 or 5.12.
Refer to the manual provided with the software for how to configure the FTP service.
• Mac OS X
FTP service of Mac OS X
10.2.X/10.3.8/10.3.9/10.4.2/10.4.4/10.4.8/10.4.9/10.4.10/10.4.11/10.5/10.6
Scanning with SMB
When scanning to SMB Share, your computer must have one of the following operating
systems installed that support folder sharing:
• Microsoft Windows 2000
• Microsoft Windows Server 2003
• Microsoft Windows Server 2008
• Microsoft Windows Server 2008 R2
• Microsoft Windows XP
• Microsoft Windows Vista
• Microsoft Windows 7
• Mac OS X 10.2x/10.3x/10.4x/10.5/10.6
Enabling the port and setting up TCP/IP
To use Scan to PC service, enable the port (SMB or FTP client) and set the IP address.
The following describes the configuration procedures on the machine.
Note
You can configure the settings using CentreWare Internet Services. See the CentreWare
online help for details.
1. Enter the System Administrator Mode.
2. Press the Machine Status button.
3. Select the Tools tab.
4. Enable the SMB or FTP port.
a) Select System Settings.
b) Select Connectivity & Network Setup.
c) Select Port Settings.
d) Select SMB or FTP and then select Change Settings.
e) Select Port Status and then select Change Settings.
f) Select Enabled and then select Save.
g) Select Close.
5-11Xerox
®
D95/D110/D125/D136 Copier/Printer
System Administration Guide
Using the Scan Service

Xerox D136 Specifications

General

Brand	Xerox
Model	D136
Category	Copier
Language	English