Xerox D136 System Administration Guide

IPSec Settings
Use the following procedure to access and change the IPSec Settings:
1. From the Security Settings screen, select IPSec Settings.
2. Select the item to be set or changed, and select Change Settings.
3. Select the desired setting or enter the desired value.
4. Press Save.
5. Press Close to return to the Security Settings screen.
IEEE 802.1x Settings
Use the following procedure to access and change the IEEE 802.1x Settings:
1. From the Security Settings screen, select IEEE 802.1x Settings.
2. Select the item to be set or changed, and select Change Settings.
3. Select the desired setting or enter the desired value.
4. Press Save.
5. Press Close to return to the Security Settings screen.
Certificate Revocation Retrieval Settings
Use the following procedure to access and change the Certificate Revocation Retrieval
Settings:
1. From the Security Settings screen, select Certificate Revocation Retrieval Settings.
2. Select the item to be set or changed, and select Change Settings.
3. Select the desired setting or enter the desired value.
4. Press Save.
5. Press Close to return to the Security Settings screen.
Other Settings
Select specific settings relating to the paper used in the machine.
1. Select Other Settings.
2. Select the item to be set or changed, and select Change Settings.
3. Select the item to be changed.
4. Select Save.
E-mail Receive Protocol
The E-mail Receive Protocol setting allows you to select between the following options:
• SMTP: Simple Mail Transfer Protocol (or SMTP) is a networking protocol used for
sending e-mail messages between servers. Most e-mail systems that send e-mail over
the Internet use SMTP to send messages from one server to another; the messages
then can be received with an e-mail client using either POP or IMAP.
Xerox
®
D95/D110/D125/D136 Copier/Printer10-50
System Administration Guide
System Settings

Xerox D136 Specifications

General

Brand	Xerox
Model	D136
Category	Copier
Language	English