EasyManuals Logo
Home>Xerox>Copier>D136

Xerox D136 System Administration Guide

Xerox D136
250 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
5. To allow users to log in without case sensitivity, select Non-Case Sensitive next to
User ID for Login.
6. Click Apply to accept the changes or Undo to retain the previous settings.
Network Authentication
If you have an LDAP server connected to your network, you can configure the printer to
retrieve user information from the LDAP directory when authenticating a user at the
control panel.
Setting up Network Authentication
1. In CentreWare Internet Services, click Properties > Security > Authentication
Configuration.
2. On the Authentication Configuration page, next to Login Type, select Login to
Remote Accounts.
3. Select Enabled next to Print Stored File from Folder, and Enabled next to Folder
to PC/Server to enable these services.
4. Select System Settings.
5. Select Enabled next to Non-account Print to allow users without accounts to access
the printer.
6. To allow a guest user to access the printer, select On next to Guest User. Type the
Guest Password, then retype the password to verify.
7. Click Apply, then click Reboot Machine.
8. After the printer restarts, refresh your browser and navigate to the Authentication
Configuration > Step 1of 2 page, and click Next at the bottom of the page.
9. Next to Authentication System, click Configure.
10. On the Authentication System page select your Authentication System from the
drop-down list.
11. Type the Server Response Time-Out, and the Search Time-Out.
12. Select Enabled next to Assign UPN (User Principal Name) as needed.
13. Click Apply to accept the changes or Undo to retain the previous settings.
14. Click Reboot Machine.
Configuring Authentication Server Settings for Kerberos
1. In CentreWare IS, click Properties > Security > Remote Authentication Servers >
Kerberos Server.
2. Under Kerberos Server 1, type the host name or IP address of your primary server.
3. Type the Primary Server Port Number.
4. Type the host name or IP address of your Secondary Server.
5. Type the Secondary Server Port Number.
6. Type the Domain Name (realm name) of your server.
5-5Xerox
®
D95/D110/D125/D136 Copier/Printer
System Administration Guide
Using the Scan Service

Table of Contents

Other manuals for Xerox D136

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox D136 and is the answer not in the manual?

Xerox D136 Specifications

General IconGeneral
BrandXerox
ModelD136
CategoryCopier
LanguageEnglish

Related product manuals