Laser Safety
NORTH AMERICA LASER SAFETY
This product complies with safety standards and is certified as a Class 1 Laser product under the Center for Devices
and Radiological Health (CDRH) of the United States Food and Drug Administration (FDA) implemented regulations
for laser products. This product complies with FDA performance standards for Laser products except for deviations
pursuant to Laser Notice No. 50 dated June 24, 2007. These regulations apply to laser products marketed in the
United States. The label on the machine indicates compliance with CDRH regulations and must be attached to laser
products marketed in the United States. This product does not emit hazardous laser radiation.
LLaasseerr WWaarrnniinngg
Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous exposure of laser light.
Since radiation emitted inside this product is completely confined within the protective housing and external covers,
the laser beam cannot escape from the machine during any phase of the user operation.
This product contains laser warning labels. These labels are intended for use by the Xerox Service Representative
and are placed on or near panels or shields that require special tools for removal. Do not remove any of the panels.
There are no operator serviceable areas in these covers.
EUROPEAN UNION LASER SAFETY
This product complies with IEC’s safety standard EN 60825-1: 2014.
The equipment complies with laser product performance standards set by governmental, national, and international
agencies as a Class 1 Laser Product. It does not emit hazardous radiation as the beam is totally enclosed during all
phases of customer operation and maintenance.
WWaarrnniinngg:: Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
This product contains laser warning labels. These labels are intended for use by the Xerox Service Representative
and are placed on or near panels or shields that require special tools for removal. Do not remove any of the panels.
There are no operator serviceable areas in these covers.
If you need additional safety information concerning the product or Xerox supplied materials, you may send email
request to EHS-Europe@xerox.com.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 25
Safety
To Next Page
Loading...
Need help?
General