3. Hold the staple cartridge at the position of the arrow, then remove the staple cartridge from the unit.
4. Insert a new staple cartridge into the unit.
5. Insert RR11 into the original position in the printer.
6. Close the finisher front cover.
REPLACING THE BOOKLET STAPLE CARTRIDGE FOR SADDLE STITCHING
Note: Before performing this procedure, ensure that the printer is not printing.
Note: This procedure is applicable only to the PR Booklet Maker Finisher.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 425
Production Ready Finishers
To Next Page
Loading...
Need help?
General