Inserter Module
Use the Inserter Module to load paper such as blank, pre-printed, or special stock that you want inserted into the
finished output.
Note: The Inserter Module is provided with the production ready finisher. For details, refer to Overview of the
Production Ready Finishers.
GBC
®
AdvancedPunch
™
Pro
The GBC
®
AdvancedPunch
™
Pro is an automatic hole-punch module that integrates with the press to streamline the
production of reports, directories, pricing guides and other bound books. The hole-punch module equals or
surpasses traditional quality while saving time and increasing productivity by eliminating the labor-intensive steps
of manual punching. The compact AdvancedPunch Pro requires minimal space and accepts various optional,
multiple hole-punch die sets.
The GBC
®
AdvancedPunch
™
Pro can be connected to various optional finishing devices and sits in line with the
devices.
Note: This optional finishing device requires the Interface Decurler Module.
The GBC
®
AdvancedPunch
™
Pro provides the following capabilities:
• Punches a broad range of media sizes and types
• Trailing edge, LEF (Long-Edge Feed), and SEF (Short-Edge Feed) hole punching
• A die set detection control panel shows the die type and cycle count
• User die set options include comb, wire, coil, and 3–7 hole varieties to enable the most popular binding formats
38
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
Getting Started
To Next Page
Loading...
Need help?
General