4. Rotate knob 33bb to the right, then remove the jammed paper.
5. If necessary, close the front cover of the finisher.
6. Close the left cover of the trimmer device.
7. If the printer control panel message indicates that there are more paper jams, follow the instructions to clear
the paper jams and to resume printing.
Clearing Paper Jams from SquareFold
®
Trimmer Area E3
Note: Before you perform this procedure, ensure that the printer is not printing.
1. To open the right cover of the trimmer device, press the button on the cover.
2. Remove the jammed paper.
478 Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
SquareFold
®
Trimmer Module
To Next Page
Loading...
Need help?
General