Yamaha YZF-R7 User Manual

7 - 50
CHAS
EAS00311
Order Job/Part Q’ty Remarks
Removing the clutch release cylin-
der
Remove the parts in the order listed.
Bottom cowling Refer to “COWLINGS” in chapter 3.
Clutch fluid Drain.
1 Starter knob 1
2 Union bolt 1
3 Copper washer 2
4 Clutch hose 1
5 Clutch release cylinder assembly 1
6 Dowel pin 2
For installation, reverse the removal
procedure.
HYDRAULIC CLUTCH

Yamaha YZF-R7 Specifications

General

Bore x Stroke	80.0mm x 68.6mm
Compression Ratio	11.5:1
Fuel Delivery	Fuel injection
Final Drive	Chain
Front Brakes	Dual 298mm hydraulic disc; ABS
Rear Brakes	245mm hydraulic disc; ABS
Front Tire	120/70ZR17
Rear Tire	180/55ZR17
Wheelbase	54.9 in
Seat Height	32.9 in
Fuel Capacity	3.4 gal
Wet Weight	414 lb
Ground Clearance	5.3 in
Engine Type	Liquid-cooled, 4-stroke, DOHC, 4-valves
Transmission	6-speed
Front Suspension	41mm KYB inverted fork, adjustable preload, rebound and compression damping; 5.1-in travel
Rear Suspension	Single shock, adjustable preload and rebound damping; 5.1-in travel