ENGINE SPECIFICATIONS
SPEC
2 - 2
ENGINE SPECIFICATIONS
Item Standard Limit
Engine
Engine type Liquid-cooled, 4-stroke, DOHC ----
Displacement 749 cm
3
----
Cylinder arrangement Forward-inclined parallel 4-cylinder ----
Bore
×
stroke 72
×
46 mm (2.83
×
1.81 in) ----
Compression ratio 11.4:1 ----
Engine idling speed 1,000 ~ 1,200 r/min ----
Vacuum pressure at engine idling
speed
15.8 ~ 18.4 kPa
(120 ~ 140 mm Hg, 4.72 ~ 5.51 in Hg)
----
Standard compression pressure
(at sea level)
157 kPa
(1.57 kgf/cm
2
, 22.3 psi) at 500 r/min
----
Fuel
Recommended fuel Premium unleaded gasoline ----
Fuel tank capacity
Total (including reserve) 23 L (20.2 Imp qt, 24.3 US qt) ----
Reserve only 4.8 L (4.22 Imp qt, 5.07 US qt) ----
Engine oil
Lubrication system Wet sump ----
Recommended oil
Yamalube 4 (20W40) or SAE 20W40 type
SE motor oil (40˚F/5˚C or above)
(Non-Friction modified)
Yamalube 4 (10W40) or SAE 10W40 type
SE motor oil (60˚F/15˚C or below)
(Non-Friction modified)
----
Quantity
Total amount 3.6 L (3.2 Imp qt, 3.8 US qt) ----
Without oil filter cartridge
replacement
2.6 L (2.3 Imp qt, 2.7 US qt) ----
With oil filter cartridge replace-
ment
2.8 L (2.5 Imp qt, 3.0 US qt) ----
Oil pressure (hot) 40 kPa (0.4 kgf/cm
2
, 5.69 psi) at
1,100 r/min
----
Relief valve opening pressure 480 ~ 560 kPa
(4.8 ~ 5.6 kgf/cm
2
, 68.3 ~ 79.7 psi)
----
2
To Next Page
Loading...
