YASKAWA Varispeed G7 Series User Manual

6 -86
 Stopping the Inverter by Notifying Programming Device Errors to the
Inverter (External Fault Function)
The external fault function performs the error contact output, and stops the Inverter operation if the Inverter
peripheral devices break down or an error occurs. The digital operator will display EFx (External fault [input
terminal Sx]). The x in EFx shows the terminal number of the terminal that input the external fault signal. For
example, if an external fault signal is input to terminal S3, EF3 will be displayed.
To use the external fault function, set one of the values 20 to 2F in one of the constants H1-01 to H1-10 (multi-
function contact input terminal S3 to S12 function selection).
Select the value to be set in H1-01 to H1-10 from a combination of any of the following three conditions.
• Signal input level from peripheral devices
• External fault detection method
• Operation during external fault detection
The following table shows the relationship between the combinations of conditions and the set value in H1-
.
Note 1. Set the input level to detect errors using either signal ON or signal OFF. (NO contact: External fault when ON; NC contact: External fault when
OFF).
2. Set the detection method to detect errors using either constant detection or detection during operation.
Constant detection: Detects while power is supplied to the Inverter.
Detection during operation: Detects only during Inverter operation.
Set
Value
Input Level
(See Note 1.)
Error Detection Method
(See Note 2.)
Operation During Error Detection
NO Con-
tact
NC Con-
tact
Constant
Detection
Detection
During
Operation
Deceler-
ate to Stop
(Error)
Coast to
Stop
(Error)
Emer-
gency Stop
(Error)
Continue
Operation
(Warning)
20 Yes No Yes No Yes No No N o
21 No Yes Yes No Yes No No No
22 Yes No No Yes Ye s No No No
23NoYesNoYesYesNo NoNo
24YesNoYesNoNoYesNo No
25 No Yes Yes No No Yes No No
26YesNo NoYesNoYesNo No
27 No Yes No Yes No Yes No No
28 Yes No Yes No No No Yes No
29 No Yes Yes No No No Yes No
2A Yes No No Yes No No Yes No
2B No Yes No Yes No No Yes No
2C Yes No Yes No No No No Yes
2D No Yes Yes No No No No Yes
2E Yes No No Yes No No No Yes
2F No Yes No Yes No No No Yes
TOE-S616-60.1.book 86 ページ ２０１７年８月４日 金曜日 午後３時４１分

YASKAWA Varispeed G7 Series Specifications

General

Brand	YASKAWA
Model	Varispeed G7 Series
Category	Inverter
Language	English