Configuring Call Preferences
147
4. Select the desired value from the pull-down list of Auto Answer Multiway.
5. Click Confirm to accept the change.
If Enabled is selected, the display device will display .
To configure auto answer via the remote control:
1. Select More->Setting->Call Features.
2. Check the Auto Answer checkbox.
3. Check the Auto Answer Mute checkbox.
4. Check the Auto Answer Multiway checkbox.
5. Select Save, and then press to accept the change.
The display device will display .
To configure auto answer via the CP960 conference phone:
1. Swipe down from the top of the screen.
2. Tap to enable or disable auto answer.
If the auto answer feature is enabled, the icon will appear on the status bar of the
touch screen.
Auto Dialout Mute
The auto dialout mute feature allows the system to turn off the microphone when placing a call,
so that the other party cannot hear you.
Auto dialout mute parameter on the system is described below:
Enables or disables the auto dialout
To Next Page
Loading...
Need help?
General
