Yealink VC800 Administrator's Guide

Administrator’s Guide for Yealink VC800 Video Conferencing System
150
2. Select the desired value from the pull-down list of History Record.
3. Click Confirm to accept the change.
To configure history record via the remote control:
1. Select More->Setting->Call Features.
2. Check the History Record checkbox.
3. Press to exit.
Bandwidth
The system automatically detects the available bandwidth for call connection by default. The
VC800 supports connecting to other devices with different bandwidth. If a device with lower
bandwidth joins a call, the video quality will stay the same or will not reduce a lot. You can
specify the uplink and downlink bandwidths for the system to achieve the best result. Uplink
bandwidth is the max bandwidth of outgoing calls. And downlink bandwidth is the max
bandwidth of incoming calls.
The configurable bandwidths on the system are: 256 kb/s, 384 kb/s, 512 kb/s, 640 kb/s, 768 kb/s,
1024 kb/s, 1280 kb/s, 1500 kb/s, 2000 kb/s, 3000 kb/s, 4000 kb/s.
Note
Bandwidth settings parameters on the system are described below:
Parameter
Description
Configuration Method
Uplink Bandwidth
Specifies the maximum transmitting
bandwidth for the system.
Remote Control
Web User Interface
The actual bandwidth depends on the performance of the remote system, and is affected by the
quality of the communication channel.

Yealink VC800 Specifications

General

Brand	Yealink
Model	VC800
Category	Conference System
Language	English