Yealink VC800 Administrator's Guide

Administrator’s Guide for Yealink VC800 Video Conferencing System
218
The web user interface prompts ”Delete the calllog ‘xxx’？”
5. Click Confirm to delete the call log.
You can also select Delete All from the from the pull-down list of Delete Calllog to delete all
call log.
Search Source List in Dialing
When you enter a few characters in the dialing screen, the system will search for contacts from
the enabled search source lists, and display the result in the dialing screen. The lists can be
History, Local Directory, Cloud Contacts, YMS contacts and LDAP.
Note
To match the desired list, you need to enable the search source list first. If you want to match the
LADP list, make sure LDAP is already configured. For more information on how to configure
LDAP, refer to LDAP on page 212.
To configure search source list in dialing via web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled column
and click .
The selected list appears in the Enabled column.
3. Repeat step 2 to add more lists to the Enabled column.
4. (Optional.) To remove a list from the Enabled column, select the desired list and then
click .
Cloud contacts and YMS contacts appear in the search source list only when you log into the
Yealink VC Cloud Management Service or register a YMS account.

Yealink VC800 Specifications

General

Brand	Yealink
Model	VC800
Category	Conference System
Language	English