Configuring Security Features
231
5. Enter the desired HTTPS port in the HTTPS Port field.
6. Click Confirm to accept the change.
To configure web server type via the remote control:
1. Select More->Setting->Advanced (default password: 0000) ->Advanced Network.
2. Select the desired value from the pull-down list of Web Server Type.
3. Select Save, and then press to accept the change.
Note
Transport Layer Security
TLS is a commonly-used protocol for providing communications privacy and managing the
security of message transmission, allowing the system to communicate with other remote
parties and connect to the HTTPS URL for provisioning in a way that is designed to prevent
eavesdropping and tampering.
TLS protocol is composed of two layers: TLS Record Protocol and TLS Handshake Protocol. The
TLS Record Protocol completes the actual data transmission and ensures the integrity and
privacy of the data. The TLS Handshake Protocol allows the server and client to authenticate
each other and negotiate an encryption algorithm and cryptographic keys before data is
exchanged.
The system supports TLS 1.0. A cipher suite is a named combination of authentication,
encryption, and message authentication code (MAC) algorithms used to negotiate the security
settings for a network connection using the TLS/SSL network protocol. The system supports the
following cipher suites:
DHE-RSA-AES256-SHA
DHE-DSS-AES256-SHA
AES256-SHA
EDH-RSA-DES-CBC3-SHA
EDH-DSS-DES-CBC3-SHA
DES-CBC3-SHA
The web user interface will be locked after 3 failed login attempts. Please contact your support
team or try again 3 minutes later.
To Next Page
Loading...
Need help?
General
