Yealink VC800 Administrator's Guide

Getting Started
17
Mounting the VC800 Codec on a Wall
You can also decide to mount the VC800 codec on a wall. The recommended height for VC800
codec positioning is 1.5m-1.8m above the ground.
Do the following:
1. Punch holes into the wall and then insert the expansion bolts.
Installation location for the expansion bolts and punching requirement are shown above.
2. Drive screws.
3. Push the VC800 codec along the track of the bracket.
4. Lock the VC800 codec to the L-bracket with the M3×8 screws.
Installing Batteries for the Remote Control
Do the following:
1. Open the battery cover on the back of the remote control.
2. Insert the batteries with correct polarity.

Yealink VC800 Specifications

General

Brand	Yealink
Model	VC800
Category	Conference System
Language	English