Configuring System Settings
199
3. Select the desired value from the pull-down list of Display2.
4. Click Confirm to accept the change.
USB Configuration
If you have high requirement for data security, you can disable the USB feature. If you disable
the USB feature, you cannot view the videos and screenshots stored in the USB flash driver via
the remote control, and cannot record video or capture screenshots via the remote control .
The USB configuration parameter on the system is described below.
Enables or disables the USB feature.
Default: Enabled
Note: If you change this parameter,
the system will reboot to make the
change take effect.
To configure USB configuration via web user interface:
1. Click on Setting->Video & Audio.
To Next Page
Loading...
Need help?
General
