Yealink VC800 Administrator's Guide

Administrator’s Guide for Yealink VC800 Video Conferencing System
152
4. Select Save, and then press to accept the change.
Note
Content Sharing
If a PC is connected to the VCH50 video conferencing hub, the system will start a presentation
automatically. During a call, both local and remote display devices will display the contents. You
can also start/stop a presentation manually during a call. If you disconnect the PC, the
presentation will stop automatically.
Content sharing parameters on the system are described below:
Parameter
Description
Configuration Method
Frame
Specifies the frame rate of the
presentation.
 30fps
 15fps
 5fps
 1fps
Default: 15fps
Web User Interface
Resolution
Specifies the resolution of the
presentation.
 1080P
 720P
Default: 1080P
Web User Interface
To configure the presentation via web user interface:
1. Click on Setting->Video & Audio.
2. Select the desired value from the pull-down list of Frame.
The priority of bandwidth is as follows: system bandwidth>Contact bandwidth (refer to add local
contacts).
For e
xample: the system bandwidth is 512kbps, if contact bandwidth is set to a value greater than
512bps, than the actual contact bandwidth will be 512bps. If contact bandwidth is set to a value
less than 512bps, than the actual contact bandwidth will be the value set by user.

Yealink VC800 Specifications

General

Brand	Yealink
Model	VC800
Category	Conference System
Language	English