Yealink VC800 Administrator's Guide

Administrator’s Guide for Yealink VC800 Video Conferencing System
24
Type
Network Information
802.1X
Authentication information
Configuring LAN Properties
DHCP
DHCP (Dynamic Host Configuration Protocol) is a network protocol used to dynamically allocate
network parameters to network hosts. The automatic allocation of network parameters to hosts
eases the administrative burden of maintaining an IP network. The system complies with the
DHCP specifications documented in RFC 2131. DHCP by default, which allows the system
connected to the network to become operational by obtaining IP addresses and additional
network parameters from the DHCP server.
DHCP Option
DHCP provides a framework for passing information to TCP/IP network devices. Network and
other control information are carried in tagged data items that are stored in the options field of
the DHCP message. The data items themselves are also called options.
DHCP can be initiated by simply connecting the system to the network. The system broadcasts
DISCOVER messages to request network information carried in DHCP options. The DHCP server
responds with the specific values in the corresponding options.
The following table lists the common DHCP options supported by the system.
Parameter
DHCP Option
Description
Subnet Mask
1
Specifies the client’s subnet mask.
Time Offset
2
Specifies the offset of the client's subnet in
seconds from Coordinated Universal Time (UTC).
Router
3
Specifies a list of IP addresses for routers on the
client’s subnet.
Time Server
4
Specifies a list of time servers available to the
client.
Domain Name
Server
6
Specifies a list of domain name servers available
to the client.
Log Server
7
Specifies a list of MIT-LCS UDP servers available to
the client.
Host Name
12
Specifies the name of the client.
Domain Server
15
Specifies the domain name that client should use

Yealink VC800 Specifications

General

Brand	Yealink
Model	VC800
Category	Conference System
Language	English