Administrator’s Guide for Yealink VC800 Video Conferencing System
148
mute feature on the system.
Default: Disabled
To configure auto dialout mute feature via web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of Auto Dialout Mute.
3. Click Confirm to accept the change.
If Enabled is selected, your video image will display mute icon ( ) when you place a
call.
Call Match
The call match feature allows the system to search entries automatically from the search source
list based on the entered string. Once matched, the results will be displayed on the screen. If no
list is added to the search source list, the system will not perform a search even if call match is
enabled. For more information on how to search source list in dialing, refer to Search Source List
in Dialing on page 218 .
Parameter of call match on the system is described below:
Enables or disables the call match
feature on the system.
Default: Enabled
Remote Control
Web User Interface
To Next Page
Loading...
Need help?
General
