Enova DGX Dante™ Audio Switching Boards
130
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
Enova DGX Dante Audio Switching Boards – Specifications
Applies to Dante Audio Switching Board sets FG1061-832 and FG1061-864.
Enova DGX Dante Audio Switching Board Specifications
Parameter Value
Compatible AMX Systems Enova DGX 100 Series Digital Media Switchers
• Enova DGX 800/1600/3200 (DGX3200-ASB-DAN)
• Enova DGX 6400 (DGX6400-ASB-DAN)
Compatible Enova DGX I/O Boards • DGX-I-HDMI, Enova DGX HDMI Input Board (FG1058-540)
• DGX-I-HDMI-4K, Enova DGX 4K HDMI Input Board (FG1061-540)
• DGX-O-HDMI, Enova DGX HDMI Output Board (FG1058-550)
• DGX-I-DVI, Enova DGX DVI Input Board (FG1058-600)
• DGX-O-DVI, Enova DGX DVI Output Board (FG1058-610)
• DGX-I-DXL, Enova DGX DXLink Twisted Pair Input Board (FG1058-570)
• DGX-O-DXL, Enova DGX DXLink Twisted Pair Output Board (FG1058-580)
• DGX-I-DXL-4K, Enova DGX DXLink Twisted Pair 4K Input Board (FG1061-570)
• DGX-O-DXL-4K, Enova DGX DXLink Twisted Pair 4K Output Board (FG1061-580)
• DGX-I-DXF-MMD Enova DGX DXLink Multimode Fiber Input Board, Duplex (FG1058-622)
• DGX-O-DXF-MMD, Enova DGX DXLink Multimode Fiber Output Board, Duplex
(FG1058-632)
• DGX-I-DXF-MMS, Enova DGX DXLink Multimode Fiber Input Board, Simplex
(FG1058-623)
• DGX-O-DXF-MMS, Enova DGX DXLink Multimode Fiber Output Board, Simplex
(FG1058-633)
• DGX-I-DXF-SMD, Enova DGX DXLink Single Mode Fiber Input Board, Duplex
(FG1058-620)
• DGX-O-DXF-SMD, Enova DGX DXLink Single Mode Fiber Output Board, Duplex
(FG1058-630)
• DGX-I-DXF-SMS, Enova DGX DXLink Single Mode Fiber Input Board, Simplex
(FG1058-621)
• DGX-O-DXF-SMS, Enova DGX DXLink Single Mode Fiber Output Board, Simplex
(FG1058-631)
Audio Switching 16x16 for Enova DGX 800, 24x24 for Enova DGX 1600,
40x40 for Enova DGX 3200, 80x80 for Enova DGX 6400
• Each embedded or auxiliary Dante audio output has independent volume, EQ, and sync
delay.
Audio Inputs
Auxiliary Dante Audio Input Connections (2) Dante Interface RJ-45 connectors on the input board; support for redundant network
or daisy chain (Dante Switched Mode) network configuration; Input board supports 8
channels of stereo audio from the Dante network into the DGX
• 8, 16 or 32 embedded digital audio inputs from video input positions (embedded audio
must originate as 2 channel PCM) - Applies to embedded audio inputs on Enova DGX
Input Boards for positions 1-8 (DGX 800) / 1-16 (DGX 1600) / 1-32 (DGX 3200)
• 8 Auxiliary Dante stereo audio inputs on the Input Board of the Audio Switching Board
Kit - Dante Audio inputs 9-16 (DGX 800), 17-24 (DGX 1600), 33-40 (DGX-3200)
Audio Outputs
Auxiliary Dante Audio Output Connections (2) Dante Interface RJ-45 connectors on the output board; support for redundant network
or daisy chain network configuration; Output board provides 8 channels of stereo audio
from the DGX into the Dante network
• 8, 16 or 32 embedded digital audio to video outputs - Applies to embedded audio
outputs on Enova DGX Output Boards for positions 1-8 (DGX 800) / 1-16 (DGX 1600) /
1-32 (DGX 3200)
• 8 Auxiliary Dante audio outputs on the Output Board of the Audio Switching Board Kit -
Dante Audio outputs 9-16 (DGX 800), 17-24 (DGX 1600), 33-40 (DGX-3200)
Audio Adjustments per Input (embedded video and auxiliary inputs)
Audio Input Compression • Independent Compression per input
• Low, Med, High, and Custom Presets
• Attack: 1 to 2000 ms
• Release: 10 to 5000 ms
• Compression Ratio: 1 to 20
• Threshold: -60 to 0 dB
Audio Input Gain Compensation -24 dB to +24 dB, 1 dB steps
Audio Mixing Mono to Stereo conversion per input
To Next Page
Loading...
Need help?
General
