GENERAL INFORMATION
1 - 19
ATLANTIC 125 - 200
1.8. PRODUCTS
1.8.1. LUBRICANT CHART
LUBRICANT PRODUCT
Engine oil
RECOMMENDED:
SUPERBIKE 4, SAE 5W – 40 or
4T FORMULA RACING, SAE 5W - 40.
As an alternative to the recommended oils, it is possible to use select oils
having properties in compliance with or even above A.P.I. SJ
specifications.
Transmission oil
RECOMMENDED:
F.C., SAE 75W 90 or GEAR SYNTH, SAE
75W - 90.
As an alternative to the recommended oil, use select oils having properties
in compliance with or even above A.P.I. GL3 specifications
Fork oil
RECOMMENDED:
F.A. 5W or F.A. 20W, as an alternative
FORK 5W or FORK 20W.
Should you wish to reach an average behavior between those offered by
F.A. 5W and by F.A. 20W or FORK 5W and by
FORK 20W, mix the products as follows:
SAE 10W =
F.A. 5W 67% of the volume, + F.A. 20W 33% of the
volume.
FORK 5W 67% of the volume + FORK 20W
33% of the volume.
SAE 15W =
F.A. 5W 33% of the volume, + F.A. 20W 67% of the
volume.
FORK 5W 33% of the volume + FORK 20W
67% of the volume.
Bearings and other lubrication points
RECOMMENDED:
BIMOL GREASE 481 + GREASE SM2.
As an alternative to the recommended product, use select oil for rolling
bearings, useful temperature range -30°C…+140°C, dripping point
150°C…230°C, highly anticorrosive, water and oxidization resistant.
Battery terminals Neutral grease or vaseline.
Brake fluid
The braking system is filled with
Autofluid FR. DOT 4 (DOT 5 can be
used as well) +
BRAKE 5.1 DOT 4 (DOT 5 compatible).
NOTE Before mixing different makes or types of oil, check their
compatibility.
As an alternative to the recommended fluid, use fluids having properties in
compliance with or even above SAE J1703, NHTSA 116 DOT 4, ISO 4925
specifications.
Engine coolant
RECOMMENDED:
ECOBLU – 40° C + COOL.
As an alternative to the recommended fluid, use fluids having properties in
compliance or even above basic ethylene glicol CUNA NC 956-16
specifications.
To Next Page
Loading...
Need help?
General
