ROUTINE MAINTENANCE
2 - 34
ATLANTIC 125 - 200
2.13.2. IDLING ADJUSTMENT
Adjust as follows whenever idling speed seems erratic.
Proceed as follows:
• Ride a few kilometers until warming engine up to
regular operating temperature.
• Raise the seat.
• Undo and remove the screw (1).
• Remove the protection.
• Connect an electronic rev counter to the spark plug
cable.
• Start the engine.
Engine idling speed should be about:
- 1750 ± 100 rpm;
In this case the engine does not make the rear wheel turn.
• Turn the screw (2).
- ROTATE CLOCKWISE to decrease rpm.
- ROTATE ANTI-CLOCKWISE, to increase rpm.
• Flip the throttle twistgrip open and closed repeatedly to
check for proper operation. Idling speed should remain
stable.