Handling rolls
Detection of the Remaining Roll Paper
If you have activated automatic detection of the remaining roll paper , when the roll is ejected, a barcode with text is
printed on the roll paper that identies the type of paper and amount left. If this function is activated and barcodes
are printed on the roll paper , the type of paper and amount left are automatically detected when you load a
roll. The barcode will be cut of f after it has been read.
Note
• Only the text message is printed if the document is not cut but kept in the printer , or if you are printing on
clear lm.
Important
• If the barcode on the roll is not detected, enter the type and length of paper on the Control Panel .
Follow these steps to activate detection of the remaining roll paper .
1. Press the Menu button to display MAIN MENU .
2. Press ▲ or ▼ to select Media Menu , and then press the ► button.
3. Press ▲ or ▼ to select Chk Remain.Roll , and then press the ► button.
4. Press ▲ or ▼ to select the desired setting option, and then press the OK button.
Handling Paper 189
To Next Page
Loading...
Need help?
General